(1).APPLICATION: For bonding edgebands and
for precoating of PVC,
solid wood, melamine resin
etc.
(2).PROPERTIES: No stringing
High viscosity
Good thermal stability
Good wetting properties
Good flow property
(3).TECHNICAL: Viscosity
1700-3700CPS@180℃
(4).DATA : Soft Point
95-110º C(Ring and
Ball Method)
Appearance Light
granule(with several
colors)
Solid Content 100%
(5).CONDITION: RY8128 should be used on
automatic edge banding
machine, coating machine.
Coating can be made
either on the edge or
on the section material.
The coated material is
immediately placed in
contact with the
substrate and pressed
with rolls.
Application temperature:
160-200℃ (The
temperature should be
checked directly
in the gluing system)
Coating speed:≥10m/min
The supports and edges
must be at ambient
temperature(which should
not be less than 15℃)
and the level of humidity
should not exceed 10% in
order to obtain a good
bond.
(6).SUGGESTION: 1.RY8128 should not be
mixed with any other
type of adhesive.
2.The cover of glue tank
should be closed lest
the adhesive might be
polluted.
3.If the plant line stops
for over 2 hours,The
glue temperature should
be tuned down .
(7).SAFETY: 1.Wear goggles and
adiabatic gloves when
filling hopper or pot.
2.Keep plant ventilative
and forbid any fire.
3.Consult MSDS and read
"cautions" before used
(8).STORAGE: 24 months in its original
package at an average
temperature of 25℃or
below. Store in a
clean, dry area. Keep
containers closed.
Storage temperature
should not exceed 35℃.
(9).PACKAGE : 25kg/bag